Free Shipping on ALL Orders over $80.00!

Ask a Question
Baracade Silane 40

Baracade Silane 40

Regular price $329.77 $310.00 Sale

Quantity Discounts Available Up To 20% Off, Dependent On Quantity

  Add To Cart To See Discount

 

BARACADE SILANE 40 is a deep penetrating concrete and masonry water repellent compound designed to protect concrete, block, stone and brick against the damaging effects of water intrusion, deicing chemicals, freeze-thaw exposure and airborne contaminants. Natural Finish, low luster.

See Below For VOC Restrictions For Your State

 CONTACT US VIA EMAIL OR PHONE (888-391-2227) FOR SPECIAL PRICING ON ORDERS OF 4 OR MORE 5 GAL PAILS OR 55 GALLON DRUMS!

Applications

  • Sidewalks & ramps
  • Exposed aggregate
  • Precast, prestressed & poured in place concrete
  • Parking and bridge decks
  • Industrial floors
  • Lightweight & air entrained concrete

Baracade Silane 40 is for use in all areas other than VOC-regulated regions listed below. For use in areas listed below, check out our Baracade WB 244

U.S. & Canada
California
Maricopa County, Arizona
Illinois, Indiana, Michigan, Wisconsin or Ohio covered by the Lake Michigan Air Directors Consortium (LADCO)
Maine, Vermont, New Hampshire, Maryland, Massachusetts, Rhode Island, Connecticut, Northern Virginia, New York, New Jersey, Pennsylvania, Delaware or the District of Columbia covered by the Northeast Ozone Transport Commission (NE-OTC)
Canada

 

Tech Data

 

QUESTIONS & ANSWERS

Ask a Question
  • How does your product compare with Sherwin Williams LOXON 40% Silane Water Repellant LX31T840 in terms of finish and performance. We have applied the Sherwin Williams product on Saltillo Tiles with excellent results. Our property is located in the Leeward Islands, Eastern Caribbean

    We haven't done a direct comparison but they appear to be very similar.

  • If I do decorative painting on walkway concrete with artist grade acrylic aerosol paint, will this product change the appearance or colors? Also does it provide any UV protection? If not, do you have a product that can be applied with this penetrating barrier to offer UV protection?

    This product does change the texture or appearance of the concrete however any product on top of the concrete will prevent it from penetrating.   Typically,  for your application,  I would suggest a surface sealer over penetrating sealer.  Surface sealers would give you the UV protection you are looking for.   

    Depending on finish we have a few options for you.

  • Can I use this product on concrete that has been sealed

    No.  It needs to be unsealed so it can penetrate in to the concrete.

  • How long after concrete is poured can you apply this sealer?

    You should wait a full 28 days before applying this sealer.

  • are any warranties available for this product?

    There is no specific waranty offered on this product as applications may vary due to temperature, and other conditions out of the control of the manufacturer.

  • What temp can it be applied

    40 to 90 degrees Farenheit

  • I am looking to seal my recently poured garage floor but plan to epoxy coat it in the summer . Can I use this without having to strip when I go to epoxy it ? Missouri weather .

    This is a penetrating sealer, so you cant really strip it anyway.  Depending on the type of epoxy, you have different prep requirements so need to look in to that and make sure you can apply it to a sealed surface.

  • How long does an application last

    Up to 10 years depending on the conditions.

  • Can I apply a second coat after the first is dry? I was scared it was going to change the look of some block I used it on, so I didn’t apply the 2nd cost. Now it looks great and wish I would have done the second.

    It needs to be a wet on wet application for a second coat.

  • How long will it take to dry

    2-6 hours

  • Is the product non slip.

    This product does not change the texture of the concrete as it is a penetrating sealer, not a surface sealer.

  • can this product be applied with a roller?

    Yes

  • If sprayed on inside a garage, on dry/raw concrete, how many square feet can one coat cover?

    Approximately 150 square feet per gallon

  • If you clean the surface with a product like Wet&Forget or bleach, can Barricade Silane 40 be applied afterwards?

    Yes, however any chemical used to clean the surface should always be fully cleaned off, and the surface allowed to fully dry prior to application.

  • What is the use life on these barrels? Do they have an expiration?

    In an unopened container, the shelf life is 2 years.

  • Is this product available in a smaller amount?

    Sorry, it is not available in a smaller size. 

  • How many square feet does a 5 gallon pail cover?

    Depends on the concrete but for instance driveways are 100 to 150 sqft per gallon. Smooth concrete is 150 to 250.

  • Can you achieve a water proofing membrane requirements and would you recommend using it on pool ceilings kinda like red guard? Can I paint on top of it?

    It would depend on what the requirements are for the waterproofing membrane.  I would not reccomend this product for a overhead application.  It is not thick enough to apply overhead.  Also, paint most likely would not adhere to the surface afte it has been sealed.

  • Were can I purchase in area 48840

    Sorry,  I don't have a list of other distributors in your area.   Also, due to your states VOC restrictions,  this product is not able to go to your state.

  • What amount of cleaning is required for a parking lot or sidewalk that is 3 years old? Is leaf blower enough if concrete appears clean?

    I would recommend a pressure washer. I don't think a leaf blower would get all of the stuck on dirt.

  • Is the Barricade Silane 40 an appropriate product for a flagstone patio or is something else a better solution in Southeast Michigan. Also considering a wet look option.

    Baracade is a penetrating sealer, but don't think it will penetrate in to Flagstone.   You would be better off with a surface sealer

  • If rolled on, will 1 gallon still cover 150 square feet?

    If applied correctly, it should still cover the same square footage as spraying.

  • Can it be rolled on vs. spray on?

    Yes, it can be sprayed or rolled.  The biggest thing is to make sure it doesnt puddle.

  • How often does it need to be applied in a high traffic area

    Assuming exterior,  roughly every 5 years