Free Shipping on ALL Orders over $80.00!

Ask a Question
Ghostshield: Epoxy Max 100

Ghostshield: Epoxy Max 100

$264.88 $199.88 Sale

100% SolidsEpoxy CoatingEpoxy Max™ 100

Repel chemicals and resist abrasions with this 100% solids high-build epoxy coating - can be used as a clear or solid color system, with flakes or metallics.

100% Solids

Epoxy Max 100 is a 100% solids, two-component self-leveling epoxy designed to coat concrete floors with excellent chemical resistance. Combining the highest quality epoxy components, the Epoxy Max 100 seals and provides a high build floor.

Best Used as a Base Coat

Best used as a primer and/or base coat. Supplied as a two-component kit that is easily applied with a squeegee. Best used as a system for interior floors exposed to potential fuel or chemical spills, heavy equipment, or extreme temperatures such as repair shops, garages and warehouse floors. A topcoat is recommended after application for added UV stability and abrasion resistance. Best used with the Armor-Tek 830 topcoat for clear, solid color floors or metallic floors. Best used with the Polyaspartic 930 for flake floors. Best used with Max Wear Urethane 960 for industrial floors.

For Use On:

  • Concrete Floors
  • Basement Floors
  • Garage/Shop Floors
  • Warehouse Floors
  • Kennels
  • Commercial Kitchens (Meets FDA Requirements)

Not For Use On:

  • Exterior/Outdoor Applications

 

High-Gloss Enhancement

Epoxy Max 100 leaves a high-gloss finish that will not fade or delaminate when used with a durable topcoat. Regular maintenance will keep concrete looking good for years to come. Can be used clear or with a color additive. Flakes and/or metallic additives can be used to create durable yet decorative finishes.

 

  • COVERAGE: 50-150 square feet per gallon
  • COATS: 1
  • FINISH: High-Gloss
  • PACKAGING: 3 gal kit

 Spec Sheet

Back to High Performance Coatings

QUESTIONS & ANSWERS

Ask a Question

  • will this product will yellow over time I need to do a living room with windows everywhere a lot of sun light will pass through

    Typically the top coat will protect the epoxy.  There is a urethane option and Polyaspartic option depending on what look you're trying to achieve for your floors.

  • Can I put flakes on this while it's wet ?

    Yes, then you would need a top coat such as Polyaspartic 930.

  • Can it be used on tile floor?

    No,  it will not adhere to tile unfortunately 

  • 1200 sqft with expansion joints.Do you need to fill in expansion joints?

    It is recommended to fill the expansion joints prior to putting down the epoxy.

  • Is this a 3 gallon kit. I need coverage for approx. 450 sq/ft

    This is a 3 gallon kit, coverage is 50 to 150 sqft per gallon depending on thickness. So it should cover 450 square feet at 10 mils thickness.