Free Shipping on ALL Orders over $80.00!

Ask a Question
Ghostshield: Micro-Degreaser 1100

Ghostshield: Micro-Degreaser 1100

Regular price $64.88 Sale

MICRO-DEGREASER 1100

An odorless, eco-friendly concrete cleaner and degreaser. Available in an industry leading, concentrated formula.



POWERFUL & CONCENTRATED

Eliminating the need to use harsh chemicals, the 1100 safely cleans and degreases. This powerful, 100% biodegradable concrete cleaner and degreaser has absolutely no acids, solvents, or VOC's. Specially formulated to lift dirt, oil, sludge, and grime. The 1100 will also encapsulate and lift petroleum-based oil, vegetable and animal fats along the way.

SAFELY CLEANS
WITH NO ODOR

Easily applied with a sprayer and agitated with a stiff bristle broom, the 1100 can be used indoors and outdoors on new and old concrete, brick and masonry. No neutralizing is required after using this product.

  • Concrete / Masonry
  • Brick
  • Garages / Shop Floors
  • Warehouse Floors
  • Driveways / Sidewalks
  • Patios / Pool Decks

LIFTS GREASE AND GRIME

This ultra-safe solution will outperform traditional acid-based cleaners and leave concrete cleaner, lighter and brighter than the day it was poured. New and old oil-based stains, dirt and grime will be lifted and flushed to the surface. Shipped concentrated, this product can be diluted with water for lighter soils or used at full strength for harsher, embedded stains.

 

  • COVERAGE: Up to 750 square feet
  • COATS: 1
  • CONCENTRATED: One gallon makes up to eleven (11) gallons

            Sizes

            • 1 gallon 

            Tech Data

            Application Instructions:

            Reconstitution

            Only mix with water. Mix solution slowly in an open-top plastic container. Stir gently. Ratio varies by desired use: for a light cleaning, ten (10) parts water to one (1) part Micro-Degreaser 1100; for moderate cleaning, four (4) parts water to one (1) part Micro-Degreaser 1100 and for heavy cleaning, one (1) part water to one (1) part Micro-Degreaser 1100.

            Application

            1. Always test a small area before application to ensure desired ratio, etch time, coverage rates and to verify application technique.

            2. Apply using a low-pressure pump sprayer. Allow the solution to sit on the substrate for two (2) to ten (10) minutes. If necessary agitate with a stiff bristle nylon brush or broom. Flush thoroughly with clean water. Repeat the process as needed. You do not need to neutralize after using Micro-Degreaser 1100.

            Clean Up

            Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

            Best Performance

            • Proper application is the responsibility of the user.
            • Make sure the most current versions of product data sheets and SDS are being used.
            • For professional use only. Keep out of reach of children.

            Precautions/Safety

            Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

             

            CONTACT US VIA EMAIL OR PHONE (888-391-2227) FOR SPECIAL PRICING ON ORDERS OF 4 OR MORE 55 GAL DRUMS!

            QUESTIONS & ANSWERS

            Ask a Question
            • Can I use this on a pained floor

              This product does not have any restrictions on painted floors however it is suggested to test a small area first.