QUESTIONS & ANSWERSAsk a Question
Is this a water based acrylic
it is not water based, it is solvent based
Can this be used to seal pavers in Pinal county, Arizona? I used a polymer between the pavers.
Yes it can!
can this be mixed with rocks or landscape glass and poured into small areas on ground?
I would think you would be looking more for an epoxy type product for that application.
Is this best applied rolling or spraying it on?
Both work. If it was me, I would go with a roller as it's easier to get consistent coverage.
Is this product slippery
It can become slippery when wet, but there are options to add grip
Does this allow the concrete to breathe (water in concrete to evaporate during concrete curing). We poured concrete over a rubber membrane and sealed using this the next day after pouring. Now I’m a little worried the water may be trapped from evaporating. Thanks
This is a cure and seal so it does allow the water to evaporate.
Can this be applied over diamond clear
As a general rule, solvent based to solvent based sealer is good to go. As always, test a small area first to make sure you are getting the look you want.
What are the temp restrictions. Can the be spray applied and can this be applied over epoxy product
Do not use if ambient or substrate temperature is below 40°F (4°C). For best results condition material to a
minimum of 50°F (10°C) prior to application
Generally you would use a urethane over epoxy but depending on the epoxy product, this may work.
Can I get this in 1 gallon container. I'm sealing a memorial bench and don't need 5gallons
Sorry, this isnt available in 1 gallon containers
Can this be used on wood for a strong high gloss finish( bean bag boards)
The manufacturer doesnt specify this product for wood however Wear-Tek 4400 can be
Can you put a second coat on it and how long do you have to wait
A second coat can be applied when the first coat is tack-free. Generally around 2 hours depending on weather conditions.
Do you recommend adding grit or and additive to prevent slipping when wet. If so, what?
Adding grip is never a bad idea if you have concerns about the surface being wet and slippery. I would suggest Shur Grip
How long does it take this product to dry, how long should we plan to keep from walking on it!
Drying Time @ 70f
Tack Free 2 hours
Light foot traffic 8 hours
Maximum hardness 7 days
Can this be use inside like a big barn?
With adequate ventilation, and a plan to not have anyone in the building for awhile while it cures, yes, it can.