Free Shipping on ALL Orders over $80.00!

Ask a Question

Stone Essence - Concrete Stain

Regular price $79.00 $73.00 Sale

SEMI-TRANSPARENT STAIN FOR CONCRETE

STONE ESSENCE is a concentrated, water-based coloring system composed of UV stable, transparent, iron-oxide pigments that when applied results in a semi-transparent, natural looking concrete surface. STONE ESSENCE is not a sealer, but surfaces colored with STONE ESSENCE can be sealed with either solvent or water-based sealers. STONE ESSENCE is an alternative to acid-stained concrete.

Features & Benefits

  • No Odor
  • Won’t peel, chip, crack or fade
  • Contains no acids
  • Can be sealed as soon as it dries

Applications

  • Unpainted concrete and masonry surfaces
  • Interior and exterior
  • Patios
  • Commercial and residential
  • Architectural concrete
  • STONE-CRETE architectural wall system
  • Poured and pre-cast concrete
  • Pool decks (Kool Deck and Keystone)
  • Residential garage floors
  • Condominium catwalks

Packaging

STONE ESSENCE concentrate is available in 1 qt (0.9 L) units, covering 200 to 300 sqft

Tech Data

QUESTIONS & ANSWERS

Ask a Question
  • Would it color a large boulder ?

    Depending on the type of rock, it might.  It needs to be somewhat porous to accept the stain.

  • Will your product work on lueder limestone ? Our stone is 1 x 2 cut smooth resembling pavers.

    Assuming it isn't completely smooth, and has enough texture to adhere to,  this should work.  You will need to seal afterwards.

  • Can i use this product in the fireplace stones and it is water based?

    Yes, if it is porous, and yes it is water based

  • Will this work on Fast Set Mortar Mix?

    Yes!

  • Do different colors have to be mixed to get the Walnut stain? Or is it just that one stain I need to purchase?

    It is just one stain. Each color is Independent.

  • We have ceramic tile in our kitchen. We want to make it a little darker and with a variegated look. Will this product work for that?

    Generally ceramic is not porous enough to accept stain.  You could stain your grout though

  • I purchased this stain. I assume it will work on concrete split faced block. Could you verify that for me?

    Yes, it will work.

  • Can this be applied to a concrete pool deck? Will the chlorinated water affect the stain color or sealer? I live in the hot TX sun, will it fade? Thanks!

    It can but could risk run off when applying into the pool. Would need to seal with an appropriate sealer when done to protect from chlorinated water as well. If you keep it sealed, the color hold.

  • If the stain (INCRETE systems stone essence concentrated transparent stain) was mixed and left to dried out can it be reconstituted and used again?

    This would not be recommended as the color may not have the desired effect.

  • I have large salt and pepper granite boulders dominating my landscaping. I can’t afford to remove them. I want to tone them down to shades of brown and dark grays. What’s the best product to do this?

    You can use this to stain the boulders, however generally all stain should be sealed for longevity

  • We have 1980s giraffe stone in various tones of orange and brown on the exterior of our home. We’d like a flat finish that will simply tone back the orange to more neutral shades on some of the stones. We do not wish for it to looked painted and we do not plan to stain all the stones. Thoughts?

    Stain is an option, however all colors shown are against gray concrete, so we can't guarantee the results.

  • Might any of your colors help lighten (toward neutral grey-ish) brown brick building facade?

    I don't think this would work for that.  With the brown being the dominant color, the stain wouldn't come through as the same color

  • I recently installed some 24x24 travertine pavers in the back yard. They produce a lot of glare though. Is it possible to stain them a darker color? What kind of product would I use?

    You would be looking for a water based stain, not an acid stain.  
    Check out our Stone Essence line or Hydro-Stain

  • We live in Kona, Hawaii. I have concrete pads, custom made of various sizes and shapes at the bottom of our driveway in front of our garage. They were installed when the house was built 11 years ago. They were stained black to look like lava and sealed. Two years ago, there were areas on most of the pads showing bare cement. I hired a company to re-stain all the pads but they did not use a sealer. They looked great for about a year. Now they look worse than they did two years ago with lots of bare cement showing through. If I get this stain in black and apply, will it look uniform in color (black)? Then use a sealer afterward. How long should it last?

    I can't say how uniform it will be to your previous stain, but I also suggest sealing every year to protect your color.

  • Can I use this to cover Mexican tile in my kitchen

    No, this cant be used on ceramic tile.

  • I have a brown flagstone fireplace that I want to lighten up to a light whitewash color. Do you have a color that would work? I only saw gray that was too dark.

    Can you please email a picture to sales@concreteandcurbingsource.com?

  • I have a travertine bathroom floor (6'x4'),and the small air bubble holes,the edges around the white patch-work pick-up the gray grout color when I grouted the joints. This makes floor look dirty. Is there anything to lighten the off-gray color a bit without destroying the tiles? 2Question I have a lot more. If sealed it before installing it would that help?

    Can you send us a picture please?

  • Can a river rock flagstone patio that is sandstone color be darkened to look brownish-gray. The sandstone color has too much orange in it to me.

    Is the patio actually flagstone?  Or is it concrete? Give us a call or send us an email and we will see what we can do to help!

     888-391-2227
    sales@concreteandcurbingsource.com

  • I want to stain a corner fireplace multicolored. If I buy 3-5 colors for mixing, it’s way too much material. Would you be amenable to selling “sample” sizes?

    There are no sellable sample sizes.

  • I had pavers installed as edging around mulch. I didn’t realize that the pavers look pink against my gray house. I hate it. Can I use this product to bring Down the color of the pavers

    Yes. This works with most cementious based products.  However we reccomend testing a small area first to make sure you get the look you are after!

  • Is there something I can add to make the colors lighter?

    you can add more water.

  • Is the gray dark? Can it be used to stain orange and red brick fireplace? What is the coverage/opacity like?

    You can change the mix ration to get the desired effect.  I would test it on a small area first to see if you can get the look you want on your brick.  
    Here is the tech data for additional information: https://cdn.shopify.com/s/files/1/2077/9359/files/Stone_Essence_Tech_Data.pdf?3

  • Will this stain the concrete pointing between the rocks if i spray it on? Would brush application be better?

    yes, it will typically stain whatever is pourous to accept it. If worried about other surfaces, brushing could be used.

  • Best way to apply

    MIXING AND APPLICATION:
    Add 1 part STONE ESSENCE with 3 parts water. Mix thoroughly. Apply evenly with a pump sprayer while mixing or shaking periodically to prevent pigments from separating. Avoid puddling. Allow slab to dry completely prior to sealing.

  • Looking for a gray color

    Rich Earth or Storm Gray

  • We sealed it with your high glossy material. Do we need to give it a second coat? Thank you

    personal preference.  I usually reccomend a second coat of sealer, just to make sure the product is well protected.

  • do you carrier beige concrete stain?

    We dont have a specific color that is called beige, however we have a bunch of options, in our 3 lines of stain and im sure one of them would be close.
    https://www.concreteandcurbingsource.com/collections/concrete-stain/products/ghostshield-hydro-stain-1500
    https://www.concreteandcurbingsource.com/collections/concrete-stain/products/concrete-stain
    https://www.concreteandcurbingsource.com/collections/concrete-stain/products/stone-essence-concrete-stain

  • I would like to re-stain my concrete fountain. Once sealed, will it be safe for birds?

    Yes

  • Looking for Cherokee Red concrete stain.

    Sorry, we don't have a Cherokee red stain.  We do carry 3 different lines of stain if you find another option you like!

  • I am trying to stain a concrete water fountain. In a nutshell: it is a lady standing in a bowl and holding a basket. The water falls from the basket to the bowl. It was originally a bronze/brown color, and now the color is wearing off in high wear spots on the lady, and on the inside of the bowl--probably due to chemicals in the water. Can I use this stain in such an area? I know nothing will last forever, but I am having a hard time getting anything to stick to this statue. Thanks!

    Yes, you can use this to stain it, however the most important part is the sealing afterwards.  The sealer will protect the color and the concrete.

  • I have a stamped concrete patio about 4years old. I failed to reseal it since it was poured, and now I see spots where the top coloured surface is flaking off. Can I use Stone Essence to repair the flaked off spots? Can I apply after a good power-washing?

    You can use stone essence to color spots that need color, however due to the manufacturing process, slight changes in color may be possible.  You can apply to clean, dry concrete.

  • To stain unsealed flagstone it's been recommended that I use a watered-down concrete stain. Would this product be suitible for that? Thanks!

    This would be one option.  You could also use acid stain.

  • How do you apply I want to do a driveway. Do you mix the product? Trying to figure out how many bottles I need to buy. Thank you

    Here is a link to the Tech Data

    That will tell you how to mix and apply!

  • I have a brick fireplace. Can I use this product? How does it hold up from the heat from the fireplace?

    This can be used on brick as long as it is unpainted.  Assuming you wouldnt be applying inside the fireplace, but the surround, it should hold up fine.

  • After I stamp my concrete and use stamp release and everything is all dried up. Is it ok to just go ahead and use this to color/highlight my stamped concrete or do I have to clean concrete i stamped to get mold release off before i use this to color??

    You definitely need to clean the concrete prior to applying.

  • can this be applied over a previously 1 year ago sealed stamped concrete patio??

    No. You will need to remove the previously applied sealer so the stain can be directly to the concrete.

  • We have a fireplace hearth made of reddish tan sandstone. We would like to stain it to something in the dark grey/charcoal family. Do you think your Rich Earth or Black Stone Essence would work on our sandstone?

    We would not recommend a concrete stain for a stone application such as sandstone

  • Can this product be used to stain exterior faux stone (a masonry product) & stop the white leaching?

    The problem you would run in to is you have to mechanically abrade the the surface (grind) to get the pores to open and let in the stain.  I would be concerned with how that would look on your faux stonework.  The white leaching on the other hand is effloresence which can be fixed with a sealer such as our Siloxa-Tek-8510

  • What is quart price and gallon price? Thank you.

    One quart is $71 and that will mix with 3 quarts of water to make one gallon of stain